Automotive Coating & Treatment Products

Product Price :Get Latest Price

Product BrochureProduct Details:

Dermal, Ocular, Oral, Inhalation.Potential Acute Health Effects:Eyes: Allergic or sensitive reactions are possible causing irritation or redness.Skin: May cause irritation due to defatting of skin.Ingestion: May cause pneumonitis if aspirated into lungs.Inhalation: Excessive inhalation may cause respiratory irritation, dizziness, nausea, headache or possibly asphyxiation.SECTION 4: FIRST AID MEASURES Eye Contact: Rinse eyes cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, seek medical attention. Skin Contact: Wash with soap and water. If irritation persists, seek medical attention. Take off contaminated clothing and wash before re-use. Ingestion: Do not induce vomiting, if swallowed. Drink two large glasses of water. Seek immediate medical attention. Inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing. Resuscitate if necessary. Seek medical attention. SECTION 5: FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Foam, Dry powder, Carbon dioxide, sand and water mist. Special Fire Fighting Procedures: Avoid contact with skin and eyes. Use personal protective equipment. Unusual Fire and Explosion Hazards: Flammable. Keep away from heat and sources of ignition. Risk of receptacle bursting. Thermal decomposition can lead to release of irritating gases and vapours. SECTION 6: ACCIDENTAL RELEASE MEASURES Personal Precautions: Contents are flammable. Please refer to sections 7, 8 and 11 of this MSDS. Environmental Precautions: Do not flush into surface water or sanitary sewer system. Methods for cleaning up: Eliminate all ignition sources if safe to do so. Ensure adequate ventilation. Absorb spill with inert material (eg. dry sand or earth), then place in a chemical waste container. SECTION 7: HANDLING AND STORAGE Handling Precautions: Handle with care as container is pressurized and may burst violently if damaged. Store indoors in a cool, ventilated, non-smoking area. Keep indoors away from sources of ignition, flame and heat. Wear appropriate personal protective equipment. Wash hands before breaks and immediately after handling the product. Launder contaminated clothing and protective gear before reuse. Storage Precautions: Pressurized container. Protect from continuous sunlight exposure and do not expose to temperatures exceeding 50°C. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust

Approx. Rs 300 / TinGet Latest Price

Product BrochureProduct Details:

KEY FEATURES:

• Offers excellent corrosion protection and extreme weather protection
• Imparts a new look to old, worn out exhaust pipes and equipments
• Serviceable temperature of silencer protector coating is up to 200o C
• DIRECTIONS
• Shake well before use. The balls inside the can should move freely indicating that the contents and well mixed. Remove dust, dirt, loose rust, oil and grease from the substrate completely. Mask areas where treatment is not required. Apply first coat as a primer and allow to dry. Apply second coat after the first coat is completely dry. Re-apply on areas where additional treatment is required. Invert can upside down and spray a few bursts in air to keep the spray head unclogged before putting the can away for use later. Do not spray on plastic parts as this product contains solvents which may damage certain plastic. Wear adequate respiratory and eye protection devices and use in ventilated area.