High Temperature Grease

Product Details:

White PTFE Grease, NLGI 2 (-35°C to 130/150°C)

• Grade: 1950

• Description: Excellent EP, AW, Anti-rust properties for all types of bearings, machine elements and industrial applications. Reduced coefficient of friction due to presence of PTFE. Provides long life lubrication in many applications.

• Pack Size: 1 & 21 Kg

Red PTFE Grease, NLGI 2 (-30°C to 200°C)

• Grade: 1951

• Description: Excellent EP, AW, anti-rust properties , Suitable for all types of bearings, machine elements & industrial applications. Excellent coefficient of friction due to presence of PTFE in lithium soap complex. Provides long life lubrication in many applications.

• Pack Size: 1 & 21 Kg

Product Details:

High Temperature Grease:

These greases contain special solid lubricants that enhance their properties such as higher load, temperature and resistance. These greases are excellent for sliding surfaces under extreme conditions.

1951-1 & 21 Kg
1990-1 Kg
1920-1 & 18 Kg

Product Details:

Aerol^Ò 303, Assembly Paste is a low friction, metal pre treatment assembly aid in paste form and contains high concentration of Molybdenum disulphide and other specialty solid lubricants. Assembly pastes are designed to prevent damage to surfaces while sliding against each other at high load and low speed such as assembly or disassembly of bearings, press fitting etc. During such interference fit and press fit assembly, deformations of the mating parts arises along the length of the assembly. The occurrence of local sliding is possible as well as elastic and plastic contact deformations, which is conducive to fretting corrosion of materials. Assembly of thin walled sleeves by interference fit or press fit causes a change in hole diameter and stick slip motion is frequently observed. AerolÒ 303, Assembly Paste is designed to remove such occurrences. The excellent lubricating properties of Assembly paste is due to the hexagonal structure of its constituent, Molysulphide, which has alternate layers of molybdenum and sulphur atoms. When an assembly paste is applied to metal surfaces, the Molysulphide in the paste makes layers on the metal surface known as lamellae. These lamellae are practically incompressible and thus are capable of withstanding tremendous load up to 5,00,000 psi. Although the lamellae cannot be compressed, they do not resist shear forces (sliding friction). Infact they provide excellent lubrication due to their ability to slide over each other without any resistance. Layers formed by this paste of metal surfaces are serviceable from - 25 °C to 550 °C. Having extremely low coefficient of friction, It protects components, during critical wear in damages, from fretting, seizure and galling. It handles extreme pressures and gives complete protection during critical start up and running in period.

 

It provides closer fits without jamming and lowers the force required during assembly of close or tight fitting parts. It's special lubricating properties provides lubrication up to the yield point of most metals. It is an indispensable lubricant for general maintenance assembly of parts, press fits, threaded connections and spline lubrication.

Product Details:

Aerol® Wire Rope Grease, Grade 1920-00 is a semi-fluid, high-performance, non-soap, water-resistant Molybdenum disulphide grease, designed to reduce internal and external friction encountered in multi-strand wire ropes.

Key Features• Suitable for wire-ropes exposed to sea water environment and even under water.• Exceptional load resistance and anti-wear properties maximizes life of wire rope.• Penetrates through the strands and resists fling off.• Thin, non-tacky film reduces dust attraction.• Serviceable from -20 to 150 C

ApplicationsAerol® Wire Rope Grease, Grade 1920-00 is used in all kinds of wire ropes used in Industry and equipment.It can be applied using a brush, swab or automatic lubricator. Approximately 50m of 25mm wire-rope can be lubricated with 1 Kg of this grease.

Packing & Shelf-lifeAerol® Wire Rope Grease, Grade 1920-00 is available in 1 & 18 Kg. packs. It does not exhibit any significant change in properties if stored properly in original packs for three years. Slight change in colour or slight oil bleeding is considered normal. Warranty claim, in case of manufacturing defect is limited to one year from date of purchase.

Additional Information:

• Packaging Details: 1 & 18 Kg