Industrial Lubricant Sprays

Product Details:

Treadmill Lubricant Spray
Key Features:

• It prevents the wear and tear of treadmill belts and keep it in good condition.

• It is free from Chlorinated solvents that effect rubber and is highly adhesive to both belt and deck which ensures longer lubricant life.

• It keeps rubber belts soft and supple and dDoes not over lubricate that causes ‘slip’ in belt or does not creep or flow out of belt.

Treadmill Lubricant Spray

Applications:

Used basically for treadmill belts.

Grade 0074: Highly adhesive, transparent, non-staining lubricants (250 g)
Treadmill Lubricant Spray

Product Details:

Aerol® Wire Rope Lube Spray is a dewatering type, high performance lubricant with excellent anti-rust properties. Its penetrating properties enables water displacement, lubrication and rust protection deep inside the wire ropes. It helps to extend the operational life of the wire rope.
Key performance properties• Thin film, tenacious dressing that provides outstanding Lubrication, Rust protection and dewatering action.• Lubricant film is capable of withstanding high load and is serviceable from -30 to 100°C• The lubricant film is highly resistant to water wash-off• Once applied, it seals off the entry of water, dust and dirt into the wire rope.ApplicationAerol® Wire Rope Lube Spray is designed to lubricate ropes of hoists, drag lines, cranes and ships operating under severe environmental conditions.
Method of use:
Shake can well before use. Attach the extension tube to the actuator and spray on the wire rope from a suitable distance. It is advisable to use a solvent degreaser spray to clean off the old lubricant, dust and grime that may have accumulated on the wire rope. This will help the lubricant to penetrate better and provide better performance.
Information on Disposal of used Cans
Aerosol Cans are designed for single use only and are hazardous even when apparently empty. The cans must be completely evacuated by pressing the valve so that negligible gas remains inside and then must be punctured to release the remaining gas vapor. This shall render the can to be non-hazardous and fit for disposal as per local environmental norms.

Additional Information:

• Packaging Details: 300g

Product Details:

Aerol Penetrating Lube Spray, Grade 4343, is a unique multifunctional Penetrant, Cleaner and Lubricant. It is specifically designed to provide these three outstanding functions in Industries and Industrial processes. Its rapid and deep penetrative properties and its unique capillary action make this product an outstanding penetrant which cuts through layers of rust, dirt etc. It helps to clean and remove most oils, grease, tar, adhesive and dry rust and several other unwanted materials. It is also a non toxic, odorless, colorless lubricant for machinery and parts. Key performance properties  Quick and deep penetration into rusted threaded connectors and close fitting parts.  It penetrates deep into rusted surfaces and helps to remove rust and free up seized threaded connections.  It provides light lubrication to all types of moving parts with a non-toxic, colorless, odorless oil  It helps to clean stubborn dirt and grime formed with oil, grease, adhesives, dry rust, carbon etc.
Applications Release of rusted/stuck/jammed parts, threaded connectors etc. Rust removal from ferrous substrates. Cleaning of oil, grease, dirt, dust, grime from parts, components and surfaces. Lubrication of food, pharmaceutical, medical equipment where non-toxic lubricants are recommended. Excellent lubricant for general light lubrication of automotive, industrial, electrical, household and office equipment. Most suited for lubrication of textile and embroidery machinery due to colorless and non staining property. Lubrication of plastic and rubber parts in toys, office equipment, electronic equipment etc. Lubrication of conveyors and other mechanism, like in printing press, diaper and sanitary pad manufacturing machinery where a colorless lubricant is desired.
Method of use Spray directly on surfaces to be treated and ensure that full coverage is achieved. Use extension tube, if necessary to reach difficult areas.
Precaution during storage and use Contents are highly flammable. The cans should be kept away from sources of heat and ignition. Do not spray on flame or ignited materials. The Cans are pressurized and should not be punctured, incinerated or exposed to severe damage. This may cause the can to burst violently. Use in a well ventilated area and avoid excessive inhalation, eye or skin contact. Keep away from children. Store in a cool, dry and ventilated place below 50 C. The Cans should be used within 24 months from date of manufacture. Most Cans perform normally even after extended storage beyond the best before date may affect the contents or the packaging components. Such can may be re inspected and test run may be conducted to confirm acceptability.

Product Details:

Moly Spray

• Molysulphide compositions that are available in several grades

• Sprays out as oil, paste, dry powder, or paint depending on the grade

• Forms a film of solid lubricant on metal surfaces to provide high load resistance, wear resistance, high temperature resistance, low volatility, minimal dust attraction, non drip, non melt coatings and seizure resistant.

Grade 0606: Dry Powder Type Coating (300 g)
Grade 0505: Oil Type Coating (300 g)
Grade 2010: Paste Type Coating (300 g)
Grade 6066: Paint type, dry, bonded film coating (300 g)

Product Details:

Silicone Spray

• Pressurized solution of silicone fluids

• Non-toxic, non-staining, non-carbonizing and high and low temperature resistant lubricant

• Suitable for delicate machines, components, sensitive plastic, rubber articles and components

• Can also be used as release agents in several applications.

Grade 0070: Clear. Transparent, Oily film with minimum dust attraction. (300g)

Product Details:

Key Features:

It is a special purpose lubricant that prevents galling and seizure of threaded fasteners and connections exposed to high temperature or corrosive atmospheres.

Grade 3101: Black Paste, -30°C to 482°C (250 g)
Grade 3030: Copper Paste, -30°C to 982° C (250 g)

Product Details:

Key Features:

• It is a dry film bonded lubricant.

• The coating is air drying in nature and bonds well to metal, rubber, plastic and most substrates to form a smooth black paint like coating that lubricates and protects the surfaces from extreme pressure and friction wear.

• The Dry Graphite Lube coating withstands temperatures up to 450°C.

• Recommended as a general maintenance lubricant on gaskets, transfer belts and conveyor belts;

• As an assembly lube on motors, plant machinery and handling equipment; and as a general lubricant for high temperature, load resistant, anti-wear coating on machine components, slides, rollers, wheels, gears, chains and hoists.

• Also used as a release agent during the moulding process of diamond segments of cutting tools and several other casting and molding applications.

• Ideal for applications where oil and grease based lubricants are not recommended.

Grade 2012: Air Drying, bonded film coating ( 450 g)

Product Details:

Adhesive Grease Spray:

• A useful and handy service aid

• Modified high performance grease with non flowing properties

• Sprays out like an oil but glues to the substrate like a grease

• Lubricates inaccessible components and mechanisms without dismantling

• Resistant to high temperature (160°C), outdoor weather condition and water washout

• Grade 7001: Transparent, tacky fluid type (250 g)

Product Details:

Chain Oil Spray
Key Features:

• Chain Oil Spray for Chains in all types of vehicles operating under conditions of high temperature, high load, weather and water attack.

• Keeps the chains clean, prevents wear, tear and stretching.Improves energy efficiency.

 

Grade 4011: Serviceable from -30° to 200°C, Non-toxic in food related applications. (300 g)

Grade 4021: Serviceable from-30° to 200°C, Suitable for heavily loaded chains. (300 g)

Grade 4031: Adhesive Chain lubricant, Serviceable from -30° to 200° C. (300 g)
Chain Oil Spray
Chain Oil Spray

Product Details:

Dry Film PTFE Spray
Key Features:

• It is a lubricating preparation that deposits a dry film of poly tetrafluroethylene on the substrate.

• This film has exceptional bonding to most metal, non-metal surfaces and is unaffected by water, chemical weather.

• This lubricant film is serviceable from - 200° to 250°C.

Dry Film PTFE Spray
Applications:

• It is used where oil, grease are not tolerated.

Eg. Lubrication of food packing machines.

• It is also used as a mold release agent in several types of molding operations.

Dry Film PTFE Spray
Grade 7701: Dry Film Lubricant ( 300 g )