smoke detector tester

Product Details:

Aerol® Smoke Detector Tester simulates smoke to conveniently test the complete functionality of commercial and residential smoke detectors. Unlike the test button on the detector, it not only checks the batteries but also tests for obstruction or debris that may clog detector vents and prevent smoke from entering the sensing chamber.

Smoke Detector Tester

• Simulates smoke and provides a true, functional test for commercial and residential smoke detectors.
• Aerosol Spray with a 3 feet throw- Allows testing to be done while standing safely on the floor.
• No residue- Detectors will remain in proper working order after each test without buildup of residue.
• Non Staining- Will not discolour painted ceilings, walls or smoke detectors
• Non-toxic – The gas/smoke releases eco-friendly and non-toxic
• Plastic Sale – Will not damage plastic housing or internal circuitry
• Convenient Package – Makes testing easy, increasing the likelihood that detectors will be tested on a regular basis.

• Shake can well. For detectors connected to sprinklers or central monitoring systems, be sure system is in test mode before using Aerol Smoke Detector Tester.
• Hold can 60-120 cm below smoke detector and spray at unit for 2-3 seconds.
• Wait for a few seconds for the alarm to sound off. If alarm does not sound within 5 seconds, immediately repeat the process.
• Some units have built-in delays to reduce false alarms.
• If alarm still fails to sound, check unit for malfunction or flat batteries.

Note: Not for use on carbon monoxide detectors.

CAUTION: Pressurized & inflammable contents. . Do not puncture, heat or incinerate, Store below 50o C away from source of heat, sunlight and ignition. Do not spray on flame or ignited materials. Use in well ventilated area, avoid excess inhalation, eye and skin contact. Keep away from children.

Additional Information:

• Packaging Details: 24 aerosol cans in one carton.