Corrosion Preventive Sprays

Product Details:

Aerol® Rust Remover, Grade 9970 is a thick, viscous, acid-based fluid, primarily designed to simultaneously clean and remove rust from iron, steel and ferrous metals. Aerol® Rust Remover can be used in immersion and hand-wipe cleaning applications. Use of Aerol® Rust Remover for cleaning and rust removal must be followed with a fresh water rinse and drying otherwise re- rusting can occur. If used prior to painting, parts should be painted immediately after the drying step.

• Single step, quick and effective process.• Safe to use on a variety of metals.• Can be used in immersion or hand wipe applications.• Non-VOC and mild odor.• Leaves a protective coating for temporary corrosion protection.

Net Contents per bottle, L = 1 & 35 Ltr

Additional Information:

• Item Code: FM9970
• Production Capacity: 100000
• Delivery Time: 1-2 Weeks
• Packaging Details: 12 bottles are packed in one corrugated carton

Product Details:

Aerol® Rust Remover, Grade 9971 is a hazy white, mild acid-based fluid, primarily designed to simultaneously clean and remove rust, oil, grease, and lime deposits from iron, steel and ferrous metals including stainless steel. Aerol® Rust Remover Grade 9971 can be used in immersion and hand-wipe cleaning applications. Use of Aerol® Rust Remover Grade 9971 for cleaning and rust removal must be followed with a fresh water rinse, drying and anti-rust treatment otherwise re-rusting can occur. If used prior to painting, parts should be painted immediately after the drying step with anti-rust primer.

Key Features
• Single step, quick and effective process.• Safe to use on a variety of metals.• Can be used in immersion or hand wipe applications.• Non-VOC and mild odor.• Leaves a protective coating for temporary corrosion protection.

ApplicationsIt works well for removing rust from iron, steel or other ferrous surfaces such as pipes, railings, auto body, tanks, tools, grills and equipment. It restores and brightens stainless steel surfaces that have been contaminated during fabrication or use. It removes surface rust, water stains, organic contaminants, oil, grease, lime deposits from surface.

DirectionsWear adequate rubber or plastic gloves and safety glasses before handling the material. Use in well ventilated area only. Shake well before using. Remove loose rust and dirt by scrapping or wire brushing, if necessary. Apply on surfaces by hand wipe or dipping at temperature between 10-35°C. Leave on for 5-15 minutes as required and wash off with water. Repeat if any rust remains.

Packing & Transport Information12 bottles are packed in one corrugated carton.

Additional Information:

• Packaging Details: 1 & 35L

Product Details:

Aerol® Corrogard 6 in 1, Anti-rust Lubricant & Cleaner (Multifunctional Oil Spray), Grade 4141, is multipurpose mineral oil composition, specifically designed to provide six outstanding functions

- Prevents rust & corrosion. Being an outstanding rust preventive, it can provide indoor protection exceeding 6-12 months and outdoor protection of 3-6 months in severe circumstances.

- Drives out moisture. Its water displacing formula can drive out moisture from electrical equipment.

- Penetrates & release. It will penetrate heavily rusted bolts, nuts, threaded connections etc and help to release jammed/frozen/stuck-up parts.

- Lubricates moving parts. It will provide light lubrication to all kinds of moving parts of machinery & equipment.

- Cleans & removes unwanted materials. It helps to remove rust, oil, grease, many adhesives, carbon and other undesirable materials from surfaces.

- Stops squeaks & noise. It makes equipment and assemblies less noisy.

Key performance properties

• Pressurized with environment friendly Hydrocarbon gas for fine spray discharge

• Rust/ Corrosion prevention properties comply IS 1154 and several International Standards.

• It is generally ‘plastic safe’ and non-toxic to the user when used for intended applications.

• It’s fine mist spray enables small quantities to produce desired results and in significantly more economical in comparison to CO2 pressurized version which produces a coarse spray and excessive liquid discharge.

CG 6 in 1 Spray, Aerol 4041 = Net Contents / can (5 pack sizes)350/513 ml, 300g/439ml, 136g/200 ml 70g/103ml & 32g/47ml

CG 6 in 1 Spray, Aerol 4040 = Net Contacts 350g/444ml

ApplicationsRust and corrosion protection during storage of freshly machined components, bearings, dies and moulds, machine parts, drills, bits, chucks etc. Non-destructive disassembly of frozen, rusted/jammed assemblies such as nuts, bolts bushes, pipe joints etc. Lubrication, cleaning, weather protection and noise reduction of locks, door hinges, chains, wire ropes and delicatemechanisms of automobiles, watch & clock, arms, gym equipment and similar equipment subject to atmospheric attack.Maintenance of office machines such as typewriters, photocopiers, printers, office & hospital furniture, house hold appliances, automobiles, farm equipment, printing machinery, textile machinery, electrical equipment such as motors, relays, contractors and switch gear etc.

Additional Information:

• Item Code: FM4141
• Production Capacity: 100000
• Delivery Time: 1-2 weeks
• Packaging Details: Twenty-four cans are packed in one corrugated carton.

Product Details:

Aerol® Corrogard Wax Spray is a temporary rust / corrosion preventive in an aerosol pack designed to provide protection to metal surfaces, against atmospheric corrosion.

When sprayed on the substrate it leaves a thin, soft, wax film which protect against atmospheric corrosion.

Key Features

• Choice of Dry type or Non-drying, seamless self-repairing film.

• Excellent adhesion to most metal surfaces.

• Has ability to displace moisture from wet surfaces.

• Does not emulsify and wash off with water after application.

• Non toxic and compatible with most plastics.

• Estimated Indoor protection 12-24 months and outdoor protection 6-12 months.

• Available as Thin film, Thick film, non sag, semi-flow able and high temperature resistant type coatings.

Applications

Rust and corrosion protection during storage of freshly machined components, bearings, dies and moulds, machine parts, drills, bits, chucks etc. In-transit protection for metal components and equipments traveling by sea.

 

Additional Information:

• Item Code: FM-226
• Production Capacity: 100000
• Delivery Time: 1-2 weeks
• Packaging Details: Twenty-four cans are packed in one corrugated carton