Industrial Cleaners Spray

Product Details:

Electrical & Electronic Contact Cleaner Spray
Key Features:

• It is a cold cleaning, solvent based cleaner spray, which cleans, helps to extend the operational life, reduces downtime and maintenance of electrical and electronic switchgear, equipment and components.

• It cleans dust, dirt, carbon, oxide deposits, flux, rust, grease, oil, other common contaminants and restores resistance values, electrical properties and prevents wear, tear and burnout.

• It cleans electrical & electronic contacts/ equipment with a high pressure discharge and has rapid and complete evaporation. It is pressurized with non-­flammable CO₂ propellant.

Electrical & Electronic Contact Cleaner Spray

Applications:

It is for off-line use and is safe on most plastics, rubbers, metals, glass & ceramics.

Used in electrical and electronic switchgear, equipment & components, electrical and electronic contacts, high pressure discharged equipments.
Electrical & Electronic Contact Cleaner Spray

Additional Information:

• Item Code: FM8008

Product Details:

Electrical Maintenance Spray
Key Features:

• Prevents electrical failures caused by moisture and corrosion.
• Cleans dirt, scale and rust.
• Displaces moisture and restores wet electrical equipment.
• Lubricates with thin dielectric lubricant.
• Loosens rusted/seized parts and assemblies.
• Protects against atmospheric corrosion.
• Compatible with most plastics, metal, rubber and painted substrates.

Electrical Maintenance Spray
Application:

Aerol^® Electrical Maintenance Spray, Grade 8226 is designed to protect, lubricate and restore Electrical Connectors, Relays, Circuit Breakers, Transformers, Switch Gear, Motors, Generators, Controls and Instruments, Communication equipment, automotive electricals, starters etc.

A few specific applications are listed below

• Prevents corrosion on terminal studs, relay contacts, control panels, junction boxes, battery terminals, hinges etc
• Releases and lubricates sticky push buttons, circuit breaker levers, rusted mechanisms etc
• Protects bus bars and bus bar supports
• Cleans generator and motor windings, insulators etc
• Protection of coils from moisture ingress
• General purpose cleaning of electrical equipment. (343g/500ml)

Electrical Maintenance Spray

Additional Information:

• Item Code: FM8226

Product Details:

Electrical & Electronic Cleaner Spray
Product Description:

• Aerol® Electrical & Electronic Contact Cleaner Spray is a cold cleaning, solvent based cleaner spray, which cleans, helps to extend the operational life, reduces downtime and maintenance of electrical and electronic switchgear, equipment and components.
• It cleans dust, dirt, carbon, oxide deposits, flux, rust, grease, oil, other common contaminants and restores resistance values, electrical properties and prevents wear, tear and burnouts.

Electrical & Electronic Cleaner Spray
Electrical & Electronic Cleaner Spray

Additional Information:

• Item Code: FM8007

Product Details:

• Aerol® Paint & Gasket Remover Fluid, Grade 6021 is a solvent based, active cleaning

agent that removes paints, varnish, dried oil and grease, carbon deposits, gaskets and gasket cements from metal wood and glass surfaces.

• Its unique formulation
• enables its use on vertical surfaces without excessive running off.
• Commonly used to remove paint, varnish, gaskets, gasket cement etc and degrease
• /clean metal, wood and glass surfaces.

Product Details:

Cleaner & Degreaser Spray
Key Features:

• Specialty cleaner cum degreaser for cold cleaning of metal surfaces.

• Solvent based fluid that dissolves in most waxes, lubricants, dirt, grime, carbon, silicones, tar, etc.

• Suitable for degreasing and cleaning moulds, dies, components, machinery and inaccessible parts of equipment & assemblies.

Cleaner & Degreaser Spray
GRADES:

• Grade 6000: Fast Evaporating (350 g)
• Grade 6002: Fast evaporating (350 g)
• Grade 6003: Fast evaporating, Co2 Propellant (400 g)
• Grade 6006: Slow evaporating, penetrating (350 g)
• Grade 6010: Extremely fast evaporating (300 g)

Cleaner & Degreaser Spray

Product Details:

Electrical Contact Cleaner Spray

• Solvent type spray used for cold cleaning

• Extends the operational life of the substrate, reduces downtime and helps in maintenance

• Cleans dust, dirt, carbon oxide deposits, flux, rust, grease, oil and other common contaminants

• Restores resistance values and electrical properties

• Suitable for electrical equipment and components like electric motors, contractors, relays, solenoids, carbon bushes, battery terminals, switchgears and similar electrical equipment, machinery and automobiles

Note: Compatibility with plastic substrates must be tested before use

GRADES:


Grade 8000: Fast evaporating cleaner (350 g)
Grade 8001: Fast evaporating, non-flammable (350g, 500g)
Grade 8002: Penetrating cleaner & lubricant plastic spray (300 g)

Product Details:

Key Features

Key performance properties

• Excellent cold cleaning property.
• Free from moisture.
• Fast & residue free evaporation.
• Jet spray action ensures reach into inaccessible zones.
• Flush Off ability due to pressurized spray action.
• Free from Ozone depleting substances and Chlorinated solvents.

Grade 8003: Plastic safe cleaner (300g / 472ml)

Product Details:

Key Features:

• Aerol Autoconer Cleaner Spray is an aerosol preparation designed for cleaning,lubricating and antistatic treatment of Autocorners
• It is used to clean fluff,dust and other deposits and provide an anti-rust,anti-static treatment to splicers,knotters,spindle of spinning and weaving machines such as Autocorners and other modern textile machinery.

• Grade 0502: Fast evaporating cleaner cum lubricant(300 g)

Product Details:

Key Features:

• Aerol Spot Lifter Spray is a cleaning preparation and that removes most oil,grease spots and stains from several kinds of fabrics and clothing such as cotton,wool,silk,denim etc.

• Grade 830 & 831: Removes oil spots from garments & fabrics.(300g)

Product Details:

KEY FEATURES:

• Fast acting, active, cold cleaning preparation, viscous & non-flammable, Acid & alkali-free, removes most paint & varnishes, safe for use on wood, plaster, metal & glass, aids removal of gaskets & sealants.
• Good washable with water after use & low effect on the climate.

APPLICATIONS:

• Used for removing persistent residues such as residues of sealants, paints and adhesives, gaskets, bitumen & tar splashes.
• Also applicable to surface of metal, stainless steel, glass, wood & ceramics.

Additional Information:

• Item Code: FM6021