Dye Penetrant Sprays & Fluids

Product Details:

• Available as a 3 part system for quick and easy visual detection of flaws and cracks.

• Each set consists of a Penetrant Spray, a Cleaner Spray and a Developer Spray. Meet requirements of ASTM E 165-95 & IS 3658 (1999) for Solvent Removable Penetrant, Non-Aqueous Wet Developer and Solvent Cleaner.

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

• Meets RDSO Specification no. M&C/NDT/105/2001

• Extremely low chlorine and sulphur contents.

• Non-corrosive to most metals.

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.

• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

• It is ideal for use during welding, repairs and general maintenance.

Additional Information:

• Item Code: FM9910

Product Details:

Magnivue Developer Fluid
KEY FEATURES:

Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

Meets RDSO Specification no. M&C/NDT/105/2001

Extremely low chlorine and sulphur contents.

Non-corrosive to most metals.

Magnivue Developer Fluid
APPLICATIONS:

Quick and easy visual detection of flaws and cracks in various metallic surfaces.

Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

It is ideal for use during welding, repairs and general maintenance.

Magnivue Developer Fluid

Product Details:

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

• Meets RDSO Specification no. M&C/NDT/105/2001

• Extremely low chlorine and sulphur contents.

• Non-corrosive to most metals.

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.

• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

• It is ideal for use during welding, repairs and general maintenance.

• Item Code: FM9910

Product Details:

Key Features:

• Available as a 3 part system for quick and easy visual detection of flaws and cracks.

• Each set consists of a Penetrant Spray, a Cleaner Spray and a Developer Spray. Meet requirements of ASTM E 165-95 & IS 3658 (1999) for Solvent Removable Penetrant, Non-Aqueous Wet Developer and Solvent Cleaner.

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

• Meets RDSO Specification no. M&C/NDT/105/2001

• Extremely low chlorine and sulphur contents.

• Non-corrosive to most metals.

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.

• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

• It is ideal for use during welding, repairs and general maintenance.

Additional Information:

• Item Code: FM9930

Product Details:

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

• Meets RDSO Specification no. M&C/NDT/105/2001

• Extremely low chlorine and sulphur contents.

• Non-corrosive to most metals.

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.

• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

• It is ideal for use during welding, repairs and general maintenance.

• Item Code: FM9930

Product Details:

Aerol® Leak Detector Spray is a specially formulated fluid, designed to identify the smallest, air and gaseous leaks from pipework, fittings and equipment.

• Detects the smallest air and gas leak from pipework and fittings.
• Works well with most gases including most refrigerant gases.
• Suitable for use with most plastic and metal substrates.
• Does not promote corrosion.
• Identifies accurately, the smallest leakage or bleeding of joints.
• Ideal for leak testing of plastic, rubber and metallic pipework handling pressurized gases including Oxygen.
• Suitable for all industries, automobile garages, handling gases, particularly flammable gases and refrigerants .

• Shake the can well before use. Spray from a distance of 25-30 cm onto the area where a leak is a possibility. In the case of even a small leak, bubbles will be formed, indicating the location of the leak. Wipe off the residue and mark the leakage for identification. Use adequate precautions when using to test leaks of corrosive gases.

• This is a pressurized can. Do not puncture, heat or incinerate. Store below 50°C away from source of heat, sunlight and ignition.
• Do not spray on flame or ignited materials.Use in well ventilated area.Avoid excess inhalation, eye and skin contact. Keep away from children.
• Aerosol cans are for single time use only. After use, it is advisable to empty out the contents completely and ensure no pressure remains inside. Such empty cans may be punctured/ crushed to avoid refilling. Dispose disabled cans as per Government regulations.

Additional Information:

• Item Code: FM9900

Product Details:

Key Features:

• Available as a 3 part system for quick and easy visual detection of flaws and cracks.

• Each set consists of a Penetrant Spray, a Cleaner Spray and a Developer Spray. Meet requirements of ASTM E 165-95 & IS 3658 (1999) for Solvent Removable Penetrant, Non-Aqueous Wet Developer and Solvent Cleaner.

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.

• Meets RDSO Specification no. M&C/NDT/105/2001

• Extremely low chlorine and sulphur contents.

• Non-corrosive to most metals.

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.

• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.

• It is ideal for use during welding, repairs and general maintenance.

Additional Information:

• Item Code: FM9920

Product Details:

Aerol® Smoke Detector Tester simulates smoke to conveniently test the complete functionality of commercial and residential smoke detectors. Unlike the test button on the detector, it not only checks the batteries but also tests for obstruction or debris that may clog detector vents and prevent smoke from entering the sensing chamber.

Smoke Detector Tester

• Simulates smoke and provides a true, functional test for commercial and residential smoke detectors.
• Aerosol Spray with a 3 feet throw- Allows testing to be done while standing safely on the floor.
• No residue- Detectors will remain in proper working order after each test without buildup of residue.
• Non Staining- Will not discolour painted ceilings, walls or smoke detectors
• Non-toxic – The gas/smoke releases eco-friendly and non-toxic
• Plastic Sale – Will not damage plastic housing or internal circuitry
• Convenient Package – Makes testing easy, increasing the likelihood that detectors will be tested on a regular basis.

• Shake can well. For detectors connected to sprinklers or central monitoring systems, be sure system is in test mode before using Aerol Smoke Detector Tester.
• Hold can 60-120 cm below smoke detector and spray at unit for 2-3 seconds.
• Wait for a few seconds for the alarm to sound off. If alarm does not sound within 5 seconds, immediately repeat the process.
• Some units have built-in delays to reduce false alarms.
• If alarm still fails to sound, check unit for malfunction or flat batteries.

Note: Not for use on carbon monoxide detectors.

CAUTION: Pressurized & inflammable contents. . Do not puncture, heat or incinerate, Store below 50o C away from source of heat, sunlight and ignition. Do not spray on flame or ignited materials. Use in well ventilated area, avoid excess inhalation, eye and skin contact. Keep away from children.